Rice Lake BenchPro Series, Руководство по эксплуатации

Страница: 8 / 42

4 BenchPro Series Operation Manual
1.3.3 Keys and Symbols
For reference
only - Capacity
marking
changes with
model.
Figure 1-4. BenchPro Series Operator Display
Note
Additional capacity labels are provided with each unit. If using a scale in the applicable lb/oz mode or multi-
range kg mode, install the correct label over the existing capacity markings. See
Figure 1-5 on page 5 .
Table 1-2. Key Functions
Key Normal Operating Function User and Configuration Mode Function
Quick press to turn the unit on
Perform a zero function
Press and hold for three seconds to turn the unit off N/A
Toggle between configured weight units Enter or accept the value selected
Perform a tare function (if enabled) Scroll left
Quick press to enter the user menu and configure

,

,

,

,

,

,

,

and

parameters of the scale. See Section 3.1 on page 9
Scroll right
Table 1-3. Annunciator Functions
LCD Annunciator Description
→ 0 ←
Stable zero — indicates the scale is at a stable zero weight value
G/B
Gross/Brutto — indicates the scale is in gross mode.
N
Net — indicates a Tare condition and the net weight is displayed
W1, W2, W3
Weight range — indicates the weight range mode the scale is displaying
lb, lb:oz, oz, kg, g
Units of Measure — indicates the unit of measure the scale is displaying
power
Power LED — indicates scale is plugged into an AC outlet, batteries are charged, USB power is pro-
vided through the USB cable