Rice Lake BenchPro Series, Руководство по эксплуатации

Страница: 13 / 42

Configuration 9
3.0 Configuration
3.1 User Settings
When navigating the user settings menu, press to scroll through the parameters and options. Press to
select.
Table 3-1. User Settings
Parameter Options Definition

30 sec, 1 min, 3 min, 5 min, No off Auto Off Time Setting

On, Auto, Off Backlight Setting

nci, 8213, ECr, EH-SCP, SMA Protocol (model dependent)

1200,2400,4800,9600,19200,38400, 57600 Baud rate

7 even, 7 odd, 7 none, 8 none Parity

1,2 Stop bits

On, Off Tare

RAM, ROM, DIV-A, DIV-O Diagnostics

Done (exit)
Note
After selecting all parameter settings, move to the

parameter and press to confirm and save settings.
3.2 Service Menu
The service menu provides all configuration settings and access to perform calibrations.
To navigate the service setting menu, press to scroll through the parameters and settings; press to select.
Press to return to the previous parameter.
To enter into the service menu:
1. Remove the scale platform.
2. Remove the sealing screws.
Sealing screws
main PCB cover
Battery cover
Die-cast base
enclosure
Load
bridge
Primary
operator
display
Figure 3-1. Remove Sealing Screws
3. Press to power on the scale.
—