Rice Lake 65059, Руководство по установке

Страница: 10 / 24

RL50210 TA Load Cell Mounting Kit
6 Visit our website
www.RiceLake.com
After considering any areas that may cause accuracy problems, follow these installation
steps.
1. Determine where to position the mount and the direction it should be oriented.
Figure 2-4. Circular Mounting
Figure 2-5. Rectangular Mounting
2. Lift and block the vessel to the same height as the assembled mounts.
3. Remove the block from one support point and slide a mount into position.
4. If the mount is being fitted under the leg of a vessel, verify that the center line of the
leg passes through the center of the neoprene mount (through the center of the load
cell’s load hole).
5. Attach the top plate of the neoprene mount by bolting. Do not fully tighten as
shimming may be necessary to level.
6. Repeat Steps 4 and 5 for the remaining mounts. The vessel should now be
supported on the mounts alone.
7. Move the vessel to its final position, if needed.
The preferred mounting orientation for single ended beams is with the
longitudinal axis of the load cell pointing toward the center of the vessel
in circular mounting configurations
For rectangular vessels, the load cell’s longitudinal axis should be aligned along
the vessel’s longest dimension (right figure). In applications where a recurring side
force is present in one direction, such as in a conveyor belt or roller platform, the
longitudinal axis of the load cell should align with that force.