Rice Lake 350-10 Series, Руководство по эксплуатации

Страница: 7 / 20

Assembly
© Rice Lake Weighing Systems ● All Rights Reserved 3
2.0 Assembly
2.1 Unpacking
Place the unopened box in an open area that has ample room for unpacking the scale.
Using scissors or a box cutter, cut the strapping bands that secure the box together. Immediately after opening the box, visually
inspect the scale and components to ensure all parts are included and undamaged. If parts were damaged in shipment, notify
Rice Lake Weighing Systems and the shipper immediately.
Parts contained in the shipping box include:
• Scale
• Box containing six AA batteries and four feet
2.1.1 Repacking Scale
Retain the packaging for use in the event that the scale must be returned or moved. The product must be properly packed with
sufficient packing materials. Whenever possible, use the original carton and packing materials when shipping the scale back.
Damage caused by improper packaging is not covered by the warranty.
2.2 Scale Setup
Move the scale into the area where the weighing process will occur. Place the scale on a hard, level surface for the most
accurate weighments. Thin carpeting is acceptable, but not recommended.
Rice Lake Weighing Systems recommends using two people for lifting the scale and to use proper lifting
techniques to prevent injury.
Do not lift the scale out of the box by its handle as this can cause the hinges to break or affect the scale
operation.
1. With two people, lift the scale out of the box by the base.
2. Stand the scale on edge to remove the packing material.
Figure 2-1. Scale on Edge
3. Screw the four feet clockwise into the scale base as far as possible.
IMPORTANT
CAUTION
IMPORTANT