3.2 Functions
SET button:
Press to change the refrigerator setting from 1 (cold) to 5 (coldest).
Hold for 3 seconds to set the refrigerator to standby.
LED indicators:
These lights show the current refrigerator setting (from 1 (cold) to 5 (coldest);
these lights are also used to relay any error codes, {see more in the
troubleshooting section of this manual})
STANDBY LED
This light is to indicate when the refrigerator is in standby mode
(refrigerator and freezer are turned off ).
The first time you turn the refrigerator on, the control panel LEDs turn on for three seconds,
then display the current setting (default = 3). Your refrigerator runs continuously for several
hours until it reaches the preset temperature. After your refrigerator is fully cooled, you can
adjust the temperature up or down to your personal preference.
To temporarily suspend cooling in the refrigerator and freezer, press and hold the SET
button for three seconds. The STANDBY LED turns on and cooling is turned off. Press the
SET button again to cancel standby mode and turn the refrigerator back on.
Setting the freezer temperature
Turn the controls to adjust the freezer temperature.
Place frozen food into the freezer as quickly as possible after purchase.
Pay attention to the expiration date on the food packaging instructions.
The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
COLD
SET
COLDEST
STANDBY
Hold SET-button for 3-sec
for standby
Temperature
Control
1
1
2
3
3
2
Mid
COLD
COLDER
TEMP.
CONTROL
14
