· It is not designed for direct communication with a computer.
· It is not guarantee that all USB memory devices (or SD cards) will work on this audio system
IMPORTANT:
Do not disconnect the USB device during USB mode, as this may damage the external device or its files. Please power
off first or select another Mode before safely disconnecting the USB device.
USB Specification
Interface:
- USB 2.0 Full speed, HOST (USB HUB is not supported) Corresponding Flash memory
- Compatible with MPEG Audio 1, 2, 2.5
- Compatible with Layer 1, 2, 3
- Compatible with Bit rate: 128
– 320 Kbps
- Subfolder nest : 8 levels
- Number of track / titles max 999
- Support ID3 tag V2.0
PROGRAMMING TRACKS
Up to 20 tracks can be programmed to play tracks on an Audio or MP3-CD, USB Device or SD Card in the desired
sequence.
1.
In ― STOP ― position, press
PROGRAM /
to start programming -
―P‖ and P0-01 will start flashing on the display.
2. Press the
FORWARD SKIP
/
or
BACKWARD SKIP /
buttons once or repeatedly until the desired track
number appears on the display.
3.
For MP3 Programming:
press and hold the
PLAY/PAUSE key /
to select the desired album.
4. Press
PROGRAM /
to confirm, the display shows the stored track number and the next store position.
5. Repeat steps 2-
3 to select and store all desired tracks. ― FULL ― is displayed if you attempt to program more than 20
tracks.
6.
Press
PLAY/PAUSE /
to play the programmed tracks.
Erasing the Program
– by Remote Control or on the Main Unit
You can erase the contents of the memory as follows:
-
In Stop position: Press ― STOP ― once, or
-
During Playback: Press ― STOP ― twice, or
- Turn the ON-OFF Switch/Volume Control to OFF, or
- Select another sound source/function, or
- Press the CD OPEN/CLOSE button to open the CD door.(at CD mode)
PLAY MODE
Repeat Play Mode for CD-DA or MP3 Playback
1. Press
REPEAT /
on the Remote Control while in Play mode.
2. The default Play Mode function is OFF.
3. For
CD-DA playback
there is a choice of 2 Play Modes: ―REPEAT 1‖ / ―REPEAT ALL‖
4. For
MP3 Playback
there is a choice of 3 Play Modes: ―REPEAT 1‖ / ―REPEAT FOLDER‖ / ―REPEAT ALL‖.
MP3 RECORDING
Recording from CD to USB / SD
The system is capable of converting (encoding) a whole Audio CD into MP3 format and copy/record this to a USB mass
storage device (e.g. a Flash Drive) or SD card (not supplied). It can also copy a single MP3 track to/from a USB device
or SD card.
1.
In CD playback mode, press
REC /
to start ripping (recording) to USB/SD card (the default is USB if both
