Note: do not put down tool until chuck has completely stopped rotating.
WARNING! Do not become careless in assuming your knowledge of the tool.
DO not be filled (over repeated use) with a sense of ease and familiarity with the tool, neglecting strict
compliance to the safety instructions given with the tool.
Improper us of the tool or failure to comply with the provided safety instructions in this manual can
cause severe injury.
Remember that a split second of negligence is enough to cause serious damage.
Stay alert for your surroundings and especially for any danger that you may not hear while using the
tool.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected form its power source.
Reminder
: Make sure to maintain the machine in good working condition, carry out regular maintenance of the
machine after each use and before storage .Any breach or default of adequate maintenance reduces the life of the
machine and increases the risk of breakdowns and accidents.
To preserve the security system throughout the life of the machine, it is important to perform maintenance and proper
cleaning, DO NOT use non-compliant replacement parts and do NOT dismantle yourself the machine or change the
security features.
6.1- Cleaning
a) Clean the plastic parts with a soft and clean cloth.
Do not use aggressive cleansing agents (solvents, abrasive cleansers) or an abrasive sponge or any
sharp objects.
- Do not use any caustic chemicals to clean the plastics parts.
- Never put or immerse the product in water or any liquid and ensure that water does not penetrate the
tool or the charger.
Never splash with water or clean with high pressure hose!
b) Clean chuck with a soft brush.
c) Clean ventilation holes with soft brush.
6.2- Storage
- Clean tool before storage.
- Keep product, user manual and accessories in the original packaging.
- It is recommended to store the product in a clean, dry location, protected from frost, and keep it out of
children’s reach (e.g. lock it up).
- Do not store product in temperatures lower than 0ºC (32ºF)
- Do not place or store any object on top of the product.
6.3- Disposal
- Tool: do not dispose with household garbage. Do not throw into the environment.
Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.
- Proceed with disposal of the tool, accessories and packaging according to local regulations regarding
the protection of the environment.
Page
22
of
35
