Page
14
/
31
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed.
Use of the power tool for operations
different
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
3.3- Safety Instructions for air compressor
a- Specific Safety instructions for working with compressed air and air gun
- The compressor and the lines can become very hot during operation.
Touching these parts may result in burns.
- The air which is sucked in by the compressor must be kept free of impurities that could cause fires or
explosions in the compressor pump.
- When releasing the hose coupling, hold the hose coupling piece with your hand. This way, you can protect
yourself against injury from the rebounding hose.
- Wear safety goggles when working with the air gun. Foreign bodies or blown off parts can easily cause
injuries.
- Do not blow at people or animals or at yourself with the air gun and do not clean clothes while being worn.
b- Safety information for paint spraying
- Do not process any paints or solvents with a flash point below 55° C. There is a risk of explosion!
- Do not heat up paints or solvents.
- If hazardous liquids are processed, wear protective filter units (face guards). Also, adhere to the safety
information provided by the manufacturers of such liquids.
- Follow and observe the details which are displayed on the outer packaging of the processed material.
Additional protective measures are to be undertaken if necessary, particularly the wearing of suitable
clothing and masks.
- Do not smoke during the spraying process and/or in the work area. Paint vapours are easily combustible.
- Never set up or operate the equipment in the vicinity of a fire place, open lights or sparking machines.
- Do not store or eat food and drink in the work area. Paint vapours are harmful to your health.
- The work area must exceed 30 m3 and sufficient ventilation must be ensured during spraying and drying.
- Do not spray against the wind. Always adhere to the regulations of the local police authority when
spraying combustible or hazardous materials.
- Do not process liquids such as white spirit, butyl alcohol and methylene chloride with the PVC pressure
hose. These media will destroy the pressure hose.
c- Safety instructions for working with the compressor
- Compressed air is a potentially dangerous energy, it is necessary to use the compressor and its accessories
with extreme caution.
Ensure that the work area is clear. When in operation, the compressor must be on a stable support. Use the
compressor exclusively in horizontal position.
Always observe a safety distance of at least 2 meters between the compressor and the work area.
- Use only the carrying handle to move the compressor.
- Do not leave the unit unattended while in operation, tires or other inflatable items may burst.
