Page
13
/
21
6.2- Blade replacement
•
Remove the battery pack from the prunner.
•
Lossen the nut with using suitable hex key. (Fig. 4a)
•
Release the blades by removing the fastening screw and nut. (Fig. 4b)
•
Install new or sharpened blades into position as illustrated. (Fig. 4c)
•
Secure the blades by tightening the screw and nut. (Fig. 4d)
Fig. 4a
Fig. 4b
Fig. 4c
Fig. 4d
6.3- Storage
•
Clean the product and remove the battery before storage.
•
Apply suitable lubricant spray onto the cutting blade and the bevel gear.
•
For prolonged storage, charge the battery every 3 months.
•
Keep product, instruction manual and accessories (if any) in the original packaging.
•
Store the product in a clean environment, where is not freezing or too hot (45 ̊C).
•
Keep out of reach of children (e.g. lock it up).
6.4- Disposal
•
Do not dispose with household garbage. Do not throw into the environment.
•
Dispose of the product in a collecte centre for waste of electrical and electronic equipment,
or a waste drop-off centre; or seek advice from your local municipality.
•
Proceed with disposal of the tool, accessories and packaging according to local regulations
regarding the protection of the environment.
