Page
12
/
17
10. Melt some tin to the other soldering part.
11. Solder the two parts together; avoid over heated
12. Cool the soldering point.
13. Once soldering is finished, stop product by unplugging it from mains.
Note: Place iron tip on its stand and allow tip to cool down. Make sure that the tip is fully cold before
any intervention, maintenance or before storing.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected form its
power source.
6.1- Maintenance
Clean plastic parts with a soft clean cloth.
Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
Do not put or immerse product in water or any other liquid.
6.2- Storage
Product must be stored in a dry location. Always lock up product and keep out of reach of children
6.3- Disposal
- Do not dispose with household garbage. Do not throw into the environment.
Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.
- Proceed with disposal of remnants, the tool, accessories and packaging according to local
regulations regarding the protection of the environment.
