RIB AA14030, Руководство пользователя

Страница: 27 / 48

27
27
S
HIELDED WIRE
PRINCE 24V PLUS needs a shielded cable to connect the encoder in
order to guarantee the proper functionality of the operator PRINCE 24V
PLUS with KS2 24V.
The screen of the ENCODER cable must be earth grounded at one
end (not to the card GND), and at the opposite end the screen must
be free (conductor not connected). code ACG2133
K
S2 24V
230V code ABKS109 120V code ABKS108
E
XPANDER FOR KS2
- Pedestrian opening command
- Automatic pedestrian closing
- Management of the safety edge
- 24Vdc accessories feeding
- Management of the traffic light contr
- Management of the courtesy light
- Closing command after passing through the photocells* code ACG5471
K
2 24V
K2 24V 120V code ABK0023 K2 CRX 24V 120V code ABK0026
K2 24V 230V code ABK0024 K2 CRX 24V 230V code ABK0025
S
PARK
In order to make the systems mentioned above give the best performances, you
need to install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came Into
contact with the external copper sheath, since this would prevent the
antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK ANTENNA 91 code ACG5454
SPARK ANTENNA 433 code ACG5252
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD code ACG7061
ACG6081 - MOON 433
ACG6082 - MOON 433
R
ADIO TRANSMITTER MOON
GG
BB
C
ODE LEARNING SYSTEM RADIORECEIVERS
RX91/A quarzata and coupling code ACG5005
RX433/A super eterodyne and coupling code ACG5055
RX433/A 2CH super eterodyne, 2 channel and coupling code ACG5051
ACCESSORIES -
For the connections and the technical data of the optional equipments follow the relevant
handbooks.