SATSPEEDBOX III R7920 Manual
Page 25
Access Control
For additional security of wireless access, the Access Control facility allows you to
restrict the network access right by controlling the wireless LAN MAC address of
client. Only the valid MAC address that has been configured can access the wireless
LAN interface.
Wireless Access Control Mode: Select the Access Control Mode from the pull-
down menu.
MAC Address: Enter the MAC address of wireless client.
Comment: You may enter characters as a remark to the MAC Address you
entered.
Current Access Control List: Display all the MAC addresses you entered.
WDS
WDS means Wireless Distribution System. It is a protocol for connecting two access
points (AP) by wireless. Usually, it can be used for the following application:
Provide bridge traffic between two LANs through the wireless.
Extend the coverage range of a WLAN.
Enter WDS: Select to enable WDS
MAC Address: Enter the MAC Address of a station that is allowed to access
this Access Point.
Data Rate: select different Data Rate here
Comment: enter characters as a remark
Set Security: click this button will pop-up windows to set WDS security
