Rialtrade Compact HD Скачать руководство пользователя страница 49

Страница: 49 / 111

Item

Description

SAVE SETUP

TO A USB

User can save the current configuration (Setting values)

of DVR to the

USB memory stick. Put the USB stick on the front panel and press SEL to

start the saving process.

LOAD SETUP

FROM A USB

User can upload the configuration of DVR to another DVR using the USB

Memory stick. Put the USB stick on the front panel and press SEL to start

the loading process.

LOAD

DEFAULT

Select ON to reset the system to the default settings.

(The follow setting such as Language, DVR ID, Security User

Authentication, Security User P/W, Date format, DLS setting, Network

setting, HDD serial number and HDD error time will not be included.)

LOAD

FACTORY

DEFAULT

Select ON to reset the system to the factory default settings.

SOFTWARE

UPGRADE

User can upgrade the latest firmware to this menu. Please refer to 7.

Upgrading Firmware.

2-10. Quick Setup

In the MENU, select the QUICK SETUP tab. Then, the QUICK SETUP menu is displayed as pictured below.

Navigate through the menu items using the mouse or the control button (

◀

▲

▶

▼

) on the remote

control and change the value of the menu item.

Figure 2.10.1. Quick Setup Screen

Содержание Compact HD
















































































































Результаты поиска

Содержание Compact HD

Отзывы:

Rialtrade Compact HD, Инструкция по эксплуатации, Страница: 49 / 111

Результаты поиска

Содержание Compact HD

Отзывы: