background image

User Manual

1

Research Instruments Ltd

IVF Thermometer

Introduction

The IVF Thermometer has been specially designed for IVF laboratories, 

as an independent temperature control monitor. Laboratories use the 

IVF Thermometer to verify that any temperature-controlled equipment 

is performing as desired. The unit is waterproof and is calibrated for use 

with refrigerators, incubators and heated stages. 

Intended Use

To measure the temperature of temperature-controlled equipment 

typically used in a IVF laboratory.

Contraindication: It is not intended that this device come into direct

contactwithanytissuesamplesbeingtreatedinaclinicalsetting,orwith

media which is in direct contact with such samples.

Warranty

This instrument has been carefully assembled and tested, and is 

warranted against faulty workmanship and materials for two years from 

the date of purchase.

Duringthewarrantyperiodanydefectiveinstrumentwillberepairedor

replacedatthediscretionofthemanufacturer.Thiswarrantydoesnot

coverdamageorfailureresultingfrommisuseoraccident.
Modification,adjustmentoranyalterationwiththeinternalarrangement

of the instrument shall absolve the manufacturer from any liability in 

respect of the instrument.

Disposal

When the IVF Thermometer has reached the end of its life, it 

must not be disposed of with normal waste. Return it to RI to be 

destroyed in an environmentally safe way, or use a local facility for 

the disposal of waste electronic equipment.

Содержание IVF Thermometer













Отзывы: