RHYZEN G.SHDSL, Руководство пользователя

Страница: 41 / 49

RHYZEN G.SHDSL Router Version 1
40
5.5.8 System Authentication
Use this menu to change your user name & password. This is the same password used to access
the web configurator.
Item Field Name Description Value
Parameters
Original Password
Enter the current administrator
password for the modem
New Password
Enter the new administrator
password for the modem
Confirm New
Password Enter the new administrator
password again.
5.5.9 Upgrade using Ethernet port
Step 1: Install any TFTP server software.
Step 2: Connect GSHDSL to your PC with one Ethernet cable and also with console cable.
Step 3:
Open PC’s HyperTerminal, select baud rate as 115200. Power on GSHDSL.
Step 4: When you
see the message “
Hit any key to stop auto boot:
“, please hit any key.
Step 5:
The HyperTerminal window will show “
=>
”, then you can use the command “
printenv
“ to
view the parameters.
Step 6:
Type “
setenv serverip xxx.xxx.xxx.xxx
”, the same IP address as your PC IP address.
Step 7:
Type “
setenv ipaddr xxx.xxx.xxx.yyy
”, pls make sure the IP address is in the same
subnet with your PC.
Step 8:
You can type the command “
printenv
” to see whether you have made the correct IP
address changes.