RHYZEN G.SHDSL Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 49

background image

RHYZEN

G.SHDSL Router

Version 1

22

Ethernet port with Ethernet FCS error will be accepted then write to TDM queue
and LAN port output.
Enable: This is a FCS Enable option. Ethernet packet received from WAN
Ethernet port with Ethernet FCS error will be discarded and will not be write to
either TDM queue or LAN Ethernet port.

Port Configuration
Items

Description

E1 Enable

E1 Mode can be one of -
Disabled: All operation on this channel is disabled, including E1 interface alarm
detection, TDM packet generation to WAN Ethernet port and WAN Ethernet port (L,R Bit;
Packet Buffer Empty/Full) detection.
Enable: Enable all above operation on this channel.

E1 ClkSrc

The E1 Receive clock source
The E1 ClkSrc mode can be one of -
Local: timing generator (local).
Recover: adaptive recovery..

E1 DstIP

This field is The IP Destination Address of this CES link.

E1 DstMac

This field is The MAC Destination Address of this CES link.

E1 DstVlanPri

This field LAN Port TX VLAN VLP.

E1 DstVlanId

This field LAN Port TX VLAN ID.

E1 Impedance

E1 Impedance can be one of -
120 Ohm: 120 Ohm.
75 Ohm: 75 Ohm.

E1 Loopback

E1 Loopback can be one of -
Disabled: Normal operation during this setting the RX E1 direction is derived from
receive TDM packet. The TX E1 direction traffic is input from the LIU to TDM packet.
Near to Far: During this mode the TX Clock/Data is derived from RX direction extracted
from received TDM packet.
Near to Near: Loopback mode, during this mode the RX E1 Clock/Data is derived from
LIU input TX E1 Clock/Data.

E1 PrbsSend

E1 PrbsSend can be one of -
Disabled: Disabled.
Enabled: E1 PRBS Generator Enable:1 = A 215 ¨C 1 PRBS generator will be enabled on
this channel.

E1 PrbsRecv

E1 PrbsRecv can be one of -
Disabled: Disabled.
Enabled: E1 PRBS Analyzer Enable:1 = A 215 ¨C 1 PRBS analyzer will be enabled on
this channel.

E1 TrPWID

This field The PW ID set in the output packet header of this CES link.

E1 PrPWID

This field The receive PW ID of this CES link, the TDM packet with this PW ID will be
accept and write to the Jitter Buffer for processing.

5.4.4 VLAN Setup

Port VLAN Configuration let you create VLAN interface at each physical port.

«
...
21
22
23
24
25
...
»

Содержание G.SHDSL


















































Отзывы:

Нет отзывов

Похожие инструкции для G.SHDSL

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 9

Бренд: D-Link Страницы: 8

Бренд: D-Link Страницы: 3

Бренд: D-Link Страницы: 28

Бренд: D-Link Страницы: 2

DSL-2540B - ADSL2/2+ Modem With EN Router

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 62

Бренд: H3C Страницы: 16

Бренд: H3C Страницы: 24

Бренд: Vanguard Страницы: 4

Бренд: APM Страницы: 3

Бренд: Patton electronics Страницы: 23

BroadLink SP3353

Бренд: MicroNet Страницы: 66

Бренд: Paradyne Страницы: 23

Vigor 2760 Series

Бренд: Draytek Страницы: 54

Бренд: Netis Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды