Page 5
Wire Harness Installation
1. Completely remove the front seat bottom assembly.
2. Lay the harness parallel to the driver side of the cart to help with orientation of the
harness before installation.
3. From underneath the
driver side of the cart,
gently run the rear portion
of the harness (taillight &
battery connections)
through the opening in
the side of the battery
compartment.
4. Set the battery leads to
the side. They will be
connected after installation
of the harness and lights.
5. Feed the rear portion
of the harness
through the cart so
the taillight
connections reach
the holes in the rear
body. The shorter
cable will rest on top
of the driver side
fender. Route the
longer cable behind
the battery
compartment and
over the passenger
side rear fender.
6. Make sure the taillight leads reach the holes in
the body.
Once the leads are in position, lock them into
place on top of the fender with the wire keepers
and route them through the notch.
Fasten the lead at the taillight to the frame with
cable ties.
TO BATTERY
COMPARTMENT
12V Connections
TO REAR
Taillight
Connections
