Page 4
Operation
1. Power the strobe light
bar ON using the
ON/OFF switch.
2. Change the sequence of
the flash pattern by
pressing the momentary
switch.
3. To change to the first
flash pattern of the
sequence, hold down the
momentary switch for (5)
seconds.
4. To sync more than (2)
light bars, connect the
yellow wire to the power
source for more than (3)
seconds with the power
OFF. Configure both
light bars to display the
same flash pattern and
then connect the yellow
wires.
Your Strobe Light Bar is now complete.
Please enjoy safely!
Scan QR code or use the link below to view the installation video.
https://vimeo.com/user39935056
Amber Strobe Light Bar (LGT-297)
Sequence
Flash Pattern
FPM
1
ECE Single
150
2
Quad
71
3
Rotate 1
60
4
Single - Double - Quint
15
5
10 - Flash
69
6
Rotate 2
100
7
Alternate Single
120
8
Alternate Quad
72
9
Alternate 10 - Flash
75
10
Random
-
Red & Blue Strobe Light Bar (LGT-298)
Sequence
Flash Pattern
FPM
1
Quad (Blue)
150
2
Quad (Red)
71
3
10 - Flash (Blue)
60
4
10 - Flash (Red)
15
5
Alternate Quad (Red/Blue)
69
6
Alternate 10 - Flash (Red / Blue)
100
