User manual: Installation and Operation of Direction Finder System RHOTHETA RT-600 / SAR-DF 517
- 8 -
(8)
>Rep / DIM< Push-Button. If pushed for a short time, this button activates the setup of the display
dimming function. If pushed for a longer time (ca. 3 seconds), this button activates the repetition of the last
valid bearing and signal level information.
(9)
>Page< Rotary Switch to select displayed main pages (“DF” or “MEM”). Together with the DIM button, it is
used to set the display brightness (dimming function).
(10) >Frequency< Rotary Switch to select frequencies.
2.1.1
Power-On procedure
After switching on the unit through the ON/OFF Push-Button, a start screen is shown on the LC-Display for five
seconds:
Power-On Screen
(1)
The upper line is showing the name of the product, RT-600 / SAR-DF 517
(2)
The second line is showing the sub-version of the equipment, that means either “LE Version” for the
Law Enforcement version, or “Standard Version” for the standard version.
(3)
The fourth line is showing the web address of the manufacturer, RHOTHETA Elektronik GmbH.
(4)
The lowest line displays software version and serial number information for the antenna unit and
(5) for the display control unit.
After five seconds, the equipment switches into the operational mode by displaying the last active main page
before having been switched off, that means either the DF (Direction Finder) or the MEM (Memory) page.
