10
To take a reading, press the tick button. The instrument will operate and the results will
be displayed on the screen. If a record of each reading is required, press the export
button to send the result to a data stick or printer. See the export section of this manual
for more details. Continue taking readings by pressing the tick button. Statistics are
updated with each measurement. To reset the statistics delete the readings from the
instrument memory (see below).
Continuous reading mode
The instrument can be set to continuously take readings every 10 seconds.
Press and hold the tick button until a second beep is heard. The instrument will take
readings until the tick button is pressed again or until the 99 sample internal memory is
full.
Using the foot switch (option)
Plug the foot switch into the socket shown below. Performing a single press on the foot
switch will take a single reading. Press and hold the foot switch down to continuously
take readings. Releasing the foot switch will stop the reading cycle.
