manualshive.com logo in svg

Rhodan HD GPS ANCHOR+, Руководство пользователя

Поделиться
Скачать
Rhodan HD GPS ANCHOR+ Скачать руководство пользователя страница 16

Rhodan Marine Systems • 8297 Blaikie Court • Sarasota, Florida 34240 • Phone 941-706-4578 • Fax 941-706-4579

16

Batteries produce and contain harmful materials that may result in personal 
injury and/or property damage if improperly used. Refer to your battery manu-

facturer’s guidelines for charging, discharging, storage and care instructions.

Be sure all switches/circuit breakers are in the OFF position and fuses are 
removed when making battery connections. Failure to do so may result in 

personal injury and/or property damage.

Verify that all conductors and connectors are rated for at least 50 Amperes 
and 24VDC. All circuits MUST be protected using a 50A fuse or circuit breaker 

in series with the positive lead. Failure to do so may result in personal injury and/or 
property damage.

DO NOT connect the trolling motor batteries to any other device, including the 
main outboard engine.

The HD GPS requires 24 Volts DC to Operate. Typically, (2) 12V deep-cycle 

marine batteries are used. 

LUG (BASIC) INSTALLATION

Your GPS Anchor system is provided with a factory installed 6’ power cord with 5/16” 

ring terminals for connection to breaker/battery terminals or power lugs.  Please note 

that it is mandatory to install a fuse or breaker protection for the system circuit. This 

protection should be rated for 50A, 24V.  If you boat is already wired with a 24 volt 

power system with appropriate circuit protection, simply connect the white wire to 

the positive lug and the black wire to the negative lug.  Should you boat use a troll-

ing motor plug or not have a 24 volt trolling motor circuit, please refer to additional 

instructions below or contact an approved system installer.

PLUG INSTALLATION

If your boat is already wired with a 24 volt trolling motor battery system it may be 

necessary to install a plug on the end of the main power conductor in order to work 

with your boat.  

There are many different plugs on the market, but generally it is possible to obtain the 

appropriate plug from your local boating supply store.  Please make sure that the plug 

you install is rated for 50A, 24V.  Should you have difficulty locating the appropriate plug, 

please contact Rhodan Marine Systems, and we will do our best to assist you.

APPENDIX D:

ELECTRICAL INSTALLATION

The following process is of moderate difficulty.  Should you not feel comfort-
able performing the steps listed below, we recommend that you contact an 

authorized installer to complete this process for you.

Содержание HD GPS ANCHOR+

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды