Operation:
Once installed as per the instructions the VSDS-RVM4.3 will work automatically every time the
reversing gear is selected. The display will remain on while ever the vehicle is in reverse and go
back to standby mode in all other cases.
If you wish to turn on the display without engaging the reversing gear simply press the
POWER button on the remote.
Use the VIDEO SELECT button, to select between AV1 (Aux Input) & AV2 (Camera Input) select
AV2 and the screen will now display the image from the number plate camera. If there is no Aux
input the display will show NO SIGNAL on AV1.
To turn the unit off press the POWER button once again. The unit will then return to Auto mode.
You can adjust the Colour, Brightness, and screen display using the menu button simply select
which mode you require and use the left and right arrow buttons to adjust.
WARNING:
Both reversing cameras and parking sensors are designed only as a guide to aid
drivers. They should never be considered as a substitute for normal driver
responsibility. The driver should always observe proper driving technique and use
of mirrors whilst reversing
