RHINO Pro 300940, Руководство пользователя

Страница: 7 / 12

Your Rhino
®
Ground Rod Installation Tool
is an efficient and effective tool developed
to tackle a challenging and time consum-
ing task, driving ground rod.
With proper care and maintenance, your
Rhino
®
Ground Rod Installation Tool
will give you many years of trouble free
service.
It is very important to understand that a
post driver is a powerful machine. You
must read and understand your post driver
operating instructions before using the
post driver or any accessory in conjunction
with the post driver. It is also very impor-
tant that you make sure all operators are
trained to operate your post driver safely.
If you or any operator doesn’t understand
any of the instructions in this manual, call
Rhino Tool Company at 866-707-1808
or 309-853-5555 and we will answer any
questions you may have, or visit our web-
site at www.rhintool.com to locate your
nearest Rhino dealer or distributor.
Visually inspect your Ground Rod Instal -
lation Tool before use. The interior of the
chuck tube should be checked for obstruc-
tions, damage or wear. The outer surfaces
of the driver should also be inspected for
any defects. Do not use any accessories if
there is any damage or wear until the dam-
age or wear is corrected and repaired.
INSTALLING / DRIVING GROUND
ROD USING THE GROUND ROD
INSTALLATION TOOL
Start by loosing the bolts on the Ground
Rod Installation Tool so that the two tool
blocks come apart enough to slide the
ground rod between the blocks. Once the
rod is aligned in the concave area between
the blocks, make sure the block is in a
position where the operator can easily
set the post driver and the Ground Rod
Installation Drive Cap on top of the metal
guide pin on the side of the Ground Rod
Installation Tool. Use use a 7/8" wrench
to tighten down the bolts once the block is
positioned.
(Fig 6)
DO NOT OVER TIGHTEN .
Use Bolt Torque Specs shown
( Chart 1) . Once the bolts are prop-
erly tightened, insert the ground rod
and ground rod installation tool into the
ground vertically. Set the Ground Rod
Installation Drive Cap on top of the metal
guide pin on the side of the Ground Rod
Installation Tool. Fig. 7
3
OPERATING INSTRUCTIONS
POST DRIVER AND ACCESSORIES
Grade
Thread
Size
Max . Torque Ft . Lbs .
Dry Lubed
8 1/2-13 UNC 105 80
Chart 1
Fig. 6
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE