RHINO Pro 300940, Руководство пользователя

Страница: 11 / 12

7
i
i
To help you make informed decisions about safety, you
will find important safety information in a variety of forms,
including:
• Safety Labels on the tool
• Safety Messages Preceded by a safety alert
symbol and one of three signal words, DANGER,
WARNING, or CAUTION. These signal words mean:
Immediate hazards that will result in
severe personal injury or death.
Hazards or unsafe practices that could
result in personal injury.
Hazards or unsafe practices that could
result in injury, product or property
damage.
• Safety Headings such as IMPORTANT SAFETY
INFORMATION.
• Safety Section such as POST DRIVER SAFETY.
• Instructions how to use this post driver correctly
and safely.
TAKE SAFETY SERIOUSLY TROUBLE SHOOTING
Your safety, and the safety of others,
is very important. The proper and
safe use of your Rhino
®
tool is an
important responsibility and should
be taken seriously.
Keep this owner’s manual available,
so you can refer to it at any time.
This owner’s manual is considered
a permanent part of the tool and
should remain with the tool if resold.
The information and specifications
included in this publication were
in effect at the time of approval
for printing. Rhino Tool Company,
Inc. reserves the right, however, to
discontinue or change specifications
or design at any time without notice
and without incurring any obligation
whatever. No part of this publication
may be reproduced without written
permission from:
Rhino Tool Company
Your safety, and the safety of oth-
ers, is very important. The proper
and safe use of your Rhino
®
tool
is an important responsibility and
should be taken seriously.
Keep this owner’s manual avail -
able, so you can refer to it at
any time. This owner’s manual is
considered a permanent part of the
tool and should remain with the tool
if resold.
The information and specifications
included in this publication were
in effect at the time of approval
for printing. Rhino Tool Company,
Inc. reserves the right, however,
to discontinue or change
specifications or design at any time
without notice and without incurring
any obligation whatever. No part of
this publication may be reproduced
without written permission from:
Rhino Tool Company
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
This book contains important safety information.
Please read it carefully.
Call your local dealer, service center or Rhino Tool
Company for further assistance.
To help you make informed decisions about safety, you
will find important safety information in a variety of forms,
including:
• Safety Labels on the tool
• Safety Messages Preceded by a safety alert
symbol and one of three signal words, DANGER,
WARNING, or CAUTION. These signal words mean:
Immediate hazards that will result in
severe personal injury or death.
Hazards or unsafe practices that could
result in personal injury.
Hazards or unsafe practices that could
result in injury, product or property
damage.
• Safety Headings such as IMPORTANT SAFETY
INFORMATION.
• Safety Section such as POST DRIVER SAFETY.
• Instructions how to use this post driver correctly
and safely.
TAKE SAFETY SERIOUSLY TROUBLE SHOOTING
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
!
WARNING
!
DANGER
!
CAUTION
IMPORTANT
NOTE
This book contains important safety information.
Please read it carefully.
Call your local dealer, service center or Rhino Tool
Company for further assistance.
Symptom Explanation/Procedure
Drive Cap for
Ground Rod
Installation Tool
lodged in the
driver
Please be aware that the Drive Cap fits tightly in the 1 in adapter chuck. If the drive cap becomes lodged within the
adapter chuck, follow these steps:
Turn engine off. If operating the Ranch Pro (GPD 30) Model remove the adapter locking pin and lift up on the post driver
to slide the adapter off the drive cap post. If operating the Fence Pro or Multi-Pro models, unscrew the large Chuck Lok
Nut at the bottom of the post driver chuck and release the 1" Break-Away Chuck Lok Adapter to free the ground drive cap.
For any other post driver refer to the owners manual that came with the driver.
Drives slow or
sluggish engine
performance:
Typically this is resulting from improper driver storage or over-filling the oil causing the oil to seep into the combustion
chamber. Position the driver vertically, remove the dipstick to check oil level. If you need to remove some oil, dispose of it
properly. Refer to the engine manual that came with the post driver.
Pull-start is frozen
or hard to pull:
Refer to your engine manual. This typically results from oil seeping into the combustion chamber from improper driver storage or overfill-
ing the oil reservoir of the engine. Remove spark plug and pull hand grip several times until it pulls freely. Replace the spark plug. Check
the oil level in oil reservoir to ensure proper level. Follow starting procedure shown in the engine manual that came with your post driver.
It is not unusual, for blue smoke to be emitted from the engine, let the engine run until smoke clears.
Proper Storage:
Do not lay horizontally on the driver side or resting on the engine. If the unit cannot be stored securely in the upright position, place the
chuck on a flat surface, leaning toward the engine side until it is supported by the shroud and chuck. Position the driver on an angle with
the top handle at the topmost point.
Other problems
or technical
questions
Other problems or technical questions: Document your serial number and contact Rhino Tool Company. Phone: 309.853.5555 or
Toll Free 866-707-1808, Fax:309.856.5905, Email: service@rhinotool.com.
Symptom Explanation/Procedure
Drive Cap for
Ground Rod
Installation Tool
lodged in the
driver
Please be aware that the Drive Cap fits tightly in the 1 in adapter chuck. If the drive cap becomes lodged within the
adapter chuck, follow these steps:
Turn engine off. If operating the Ranch Pro (GPD 30) Model remove the adapter locking pin and lift up on the post driver
to slide the adapter off the drive cap post. If operating the Fence Pro or Multi-Pro models, unscrew the large Chuck Lok
Nut at the bottom of the post driver chuck and release the 1" Break-Away Chuck Lok Adapter to free the ground drive cap.
For any other post driver refer to the owners manual that came with the driver.
Drives slow or
sluggish engine
performance:
Typically this is resulting from improper driver storage or over-filling the oil causing the oil to seep into the combustion
chamber. Position the driver vertically, remove the dipstick to check oil level. If you need to remove some oil, dispose of it
properly. Refer to the engine manual that came with the post driver.
Pull-start is frozen
or hard to pull:
Refer to your engine manual. This typically results from oil seeping into the combustion chamber from improper driver storage or overfill-
ing the oil reservoir of the engine. Remove spark plug and pull hand grip several times until it pulls freely. Replace the spark plug. Check
the oil level in oil reservoir to ensure proper level. Follow starting procedure shown in the engine manual that came with your post driver.
It is not unusual, for blue smoke to be emitted from the engine, let the engine run until smoke clears.
Proper Storage:
Do not lay horizontally on the driver side or resting on the engine. If the unit cannot be stored securely in the upright position, place the
chuck on a flat surface, leaning toward the engine side until it is supported by the shroud and chuck. Position the driver on an angle with
the top handle at the topmost point.
Other problems
or technical
questions
Other problems or technical questions: Document your serial number and contact Rhino Tool Company. Phone: 309.853.5555 or
Toll Free 866-707-1808, Fax:309.856.5905, Email: service@rhinotool.com.
© 2019 Rhino Tool Company Inc., - All Rights Reserved
This owner’s manual is
considered a permanent
part of the tool and should
remain with the tool if
resold, rented or loaned.
This owner’s manual is
considered a permanent
part of the tool and should
remain with the tool if
resold, rented or loaned.
© 2019 Rhino Tool Company Inc., - All Rights Reserved
7