RHINO PIRW3, Инструкция по эксплуатации

Страница: 6 / 16

6
PIRW3
2.2. Warm up period
You must wait approximately 3 minutes for the
detector to warm up after connecting the batteries.
This time starts from when the detector starts
flashing both red and green lights after removing the
piece of plastic from under one of the battery
terminals. During this period the detector
will not
respond and should be left untouched until the 3
minute period is up. 3 minutes after power up, the
green and red lights will flash together 6 times to
indicate the detector is exiting test mode. The
detector will now automatically enter
Intelligent
Power Saving (IPS) mode (see section 4.2).
WAIT 3
MINUTES