
5
Vol Down (pin)
Located on the top right of the screen; it requires use of a pin to press and decrease
the volume.
Power (pin)
Located on the top right of the screen (middle pinhole); it requires use of a pin to
power on/off the device.
Ports
Functions
Ethernet
Located on the back of the device. This port can be used for wired network
connections.
RJ11 (RS232)
Located on the back of the device. This port can be connected to an RS232 connector
for plugging in a printer. This port is available for development purposes only.
USB A
Two located on the device and another on the side of the device. This port can be
used to connect external device for host mode.
USB C
Located on the side of the tablet. This port can be used to transfer files.
DC Power
Located on the back of the device. This This port powers the device and where the
charger goes.
RJ11 (4 pin)
Located on the back of the device. Could also be used to connect a cash drawer
(24 Volts).
Powering on device
•
Please connect the AC/DC charger to the port as shown in the photo above.
•
Make sure the flat surface of the power cord is facing down.
•
Flip the On/Off switch located at the rear bottom left of the device to power the device on.
** If device continues to beep, make sure the roll of paper is aligned or inserted properly. Also, check if the
printer door lever is closed securely (it will make a clicking sound when closing it). **
Содержание M10p
Страница 1: ...Rhino M10p ...