RHINO M10p, Руководство пользователя, Страница: 10 / 21

10
Wi-Fi
Wi-Fi provides as much as 300 feet (100M) range of wireless network access and supports both 2.4GHz and
5GHz bands. If you use your device to connect to the internet, you should connect to a wireless access point.
How to connect to a wireless network:
•
Open settings and select Network & Internet, toggle the Wi-Fi setting on. Your device will
automatically scan all wireless networks near you.
•
Alternatively, pull down the notification bar and long-tap on the Wi-Fi icon.
•
A list of Wi-Fi networks will display along with authentication in use (e.g. WPA). If you enable the
notification in Wi-Fi settings, the status box will show this icon ( ) when an open available
wireless network is found.
NB: Open NB: Open Wi-Fi networks can be dangerous, please use caution when connecting to any
connection you cannot immediately trust.
•
When the device connects to a wireless network, the status box will show this Wi-Fi icon
（ ）
,
with the approximate signal strength (the number of lit bars). If you touch the connected network
，
it will display the name of Wi-Fi network, status, speed, signal, strength, security, information, and IP
address.
•
If you want to delete the wireless settings, please touch “FORGET” as shown in the image below.