Rhino Drive360 Installation Guide
Link: https://kb.gpsinsight.com/rhino-drive360-installation-guide/ Last Updated: November 22nd, 2021
Copyright ©2022 GPS Insight
Page 2 of 10
2. Locate the vehicle fuse panel and remove any panels needed to access the panel and to route
the power cable.
3. Using the vehicle owner’s manual and a multimeter, find the vehicle circuits needed for both
device connections.
A. Constant / Yellow Wire = Keys removed from the ignition, a vehicle fuse providing 12 to
24 VDC (+).
B. Ignition / Red wire = vehicle fuse which provides at least 12 VDC (+) while vehicle is On
and vehicle running and 0 VDC (+) when key is in the Off and Accessory position.
