- 6 -
GENERAL SAFETY PRECAUTIONS
C A U T I O N
C A U T I O N
MOVING PARTS ENTANGLEMENT HAZARD
Failure to observe these instructions could lead to serious
injury or death.
To avoid injury to hands and fingers:
Never
leave winch remote control where it can be
activated during free spooling, ringing, or when the winch
is not being used.
Never
leave the wireless winch remote control turned on
when installing, free spooling, rigging or servicing winch,
or when the winch is not being used.
CUT AND BURN HAZARD
Failure to observe these instructions could lead to
minor or moderate injury.
Never
let winch rope slip through your hands.
This manual provides instructions on how to install and operate your winch and operating
your Wireless Remote Control.
SAFETY
When installing your winch system, read and follow all mounting and safety instructions.
Always use caution when working with electricity and remember to verify that no exposed
electrical connections exist before energizing your winch circuit.
For specifications and performance data, refer to the specification sheet supplied in this
manual.
N O T I C E
N O T I C E
R i g h t
W r o n g
R igh t
W ro n g
AVOID WINCH AND EQUIPMENT DAMAGE
Always
avoid side pulls which can pile up winch rope at
one end of the drum. This can damage winch rope or
winch.
Always
ensure the clutch is fully engaged or disengaged.
Always
use care to not damage the vehicle frame when
anchoring to a vehicle during a winching operation.
Never
submerge winch in water, if not IP68 rated.
Always
store the remote control in a protected, clean dry
area.
Never hook the wire rope back onto itself
because you could damage the wire rope .Use a
strap.
Avoid continuous pulls from extreme angles as
this will cause the wire rope to pile up on one
end of the drum. This can jam the can jam the
wire rope of the winch.
