RHINO 8650-AR Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 84

RHINO 8650-AR Скачать руководство пользователя страница 8

Safety Section 1-4

8650-AR 01/05

SAFETY

©

2005

Alamo Group Inc.

SAFETY

CAUTION!

PROLONGED EXPOSURE TO LOUD NOISE MAY CAUSE PERMA-
NENT HEARING LOSS!

Tractors with or without an Implement

attached can often be noisy enough to cause permanent hearing loss.
We recommend that you always wear hearing protection if the noise
in the Operator’s position exceeds 80db. Noise over 85db over an
extended period of time will cause severe hearing loss. Noise over
90db adjacent to the Operator over an extended period of time will
cause permanent or total hearing loss.

Note:

Hearing loss from loud

noise [from tractors, chain saws, radios, and other such sources
close to the ear] is cumulative over a lifetime without hope of natural
recovery.

(SG-I7)

WARNING!

Always read carefully and comply fully with the manufacturers instruc-
tions when handling oil, solvents, cleansers, and any other chemical
agent.

(SG-22)

DANGER!

KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement
and possible serious injury or death.

(SG-24)

DANGER!

Never allow children to play on or around Tractor or Implement. Children
can slip or fall off the Equipment and be injured or killed. Children can
cause the Implement to shift or fall crushing themselves or others.

(SG-25)

DANGER!

NEVER use drugs or alcohol

immediately before or while operating the

Tractor and Implement. Drugs and alcohol will affect an operator’s
alertness and coordination and therefore affect the operator’s ability to
operate the equipment safely. Before operating the Tractor or Imple-
ment, an operator on prescription or over-the-counter medication must
consult a medical professional regarding any side effects of the medi-
cation that would hinder their ability to operate the Equipment safely.

NEVER

knowingly allow anyone to operate this equipment when their

alertness or coordination is impaired.

Serious injury or death to the

operator or others could result if the operator is under the influence of
drugs or alcohol.

(SG-27)

WARNING!

Prolonged operation may cause operator boredom and fatigue affecting
safe operation. Take scheduled work breaks to help prevent these
potentially impaired operating conditions. Never operate the Implement
and Tractor in a fatigued or bored mental state which impairs proper and
safe operation.

(SG-32)

«
...
6
7
8
9
10
...
»

Содержание 8650-AR





















































































Отзывы:

Нет отзывов