Figure 13
Figure 14
Gripping
position
Gripping
position
Gripping
position
Gripping
position
MAINTENANCE AND SERVICING
1)
Prior to maintenance and servicing of the unit, turn off the power and unplug the plug.
a) Surface cleaning
Clean the surface of the unit with a clean damp soft cloth. Do not use chemical solvents
such as alcohol and petrol; as they may damage the air-conditioner
b) Cleaning of the filter frame and filter mesh
Clean the filter mesh every two weeks. If the filter frame and filter mesh are clogged with
dust or debris the function of the air-conditioner may be impaired.
2) Cleaning of the filter frame and filter mesh
a)
Hold the filters removal tabs and remove by gently pulling in the direction shown by the
arrow (as shown in Figure 13 and 14.).
Note: When taking out the filter frame or filter mesh, the force shall be applied evenly to avoid
twisting or damage of the filter frame or filter mesh. Be sure to take out the filter frame first
and then take out the filter mesh.
b)
Clean the filters in warm water (about 40˚C) add a neutral cleaner and then dry
(as shown in Figure 15).
3) Installation of the filter frame and filter mesh
Install the filter mesh first and then install
the filter frame.To install the evaporator filter mesh
and condenser filter mesh, point the back end of
the filter mesh toward the opening and then
push the filter mesh evenly and gently
into position.
a) To remove do the above in reverse.
b) The filter mesh must be installed into place;
otherwise, the filter frame may not be
installed correctly.
c) Install the filter mesh gently so as not
to damage it.
Figure 15
Note
Note
