RHINO 50F Скачать руководство пользователя страница 1

Local Air Conditioner

Thank you for selecting this air-conditioner. Please keep this User’s Manual for future reference. 
Read the User’s Manual carefully before operating this unit.

IMPORTANT SAFEGUARDS

•  This air-conditioner is suitable for indoor use only.
•  Rated operating range: this unit shall be connected to 220-240V / 50Hz power supply.
•  Ensure this is used on a flat surface at least 50cm away from surrounding objects or walls.
•  Once the air-conditioner is installed, ensure that the mains cable is in good condition and 
  inserted firmly into the power socket and always ensure that the power cord is arranged in 
  such a way to avoid tripping or the plug from being pulled out.
•  Do not insert any object into the air inlet/outlet of the air-conditioner. Be sure to keep the 
  air inlet/outlet of the air-conditioner unblocked.
•  Where there is the need to install a drain pipe, ensure that the connection of the drain 
  pipe is secure without kinks.
•  When adjusting the horizontal/vertical louver at the air outlet, turn it slightly by hand to 
  avoid damage of the Louvre.
•  Keep the unit in an upright position when moving or repositioning.
•  Keep this unit away from petrol, flammable gases, or other heat sources.
•  Do not dismantle, inspect or modify the unit without authorisation as this may impair the 
  unit, cause personal injuries or property damage; to avoid dangers, if the unit is faulty, be 
  sure to have it repaired by the manufacturer or a suitable qualified person.
•  Do not operate this air-conditioner in a bathroom or other wet environments.
•  Do not allow children to play with this machine. Closely supervise children when this unit 
  is in use.
•  Do not turn off this unit by removing the plug.
•  Do not place liquids on the unit. 
•  Do not use pest control aerosol or other flammable substances near the air-conditioner.
•  Do not wipe or wash the air-conditioner with chemical solvents such as petroleum, aerosol or
  alcohols, etc. Before cleaning the air-conditioner, be sure to turn off the power supply 
  and wipe it with a soft damp cloth; if the machine is very dirty, wipe it with a neutral cleaner.

RECOMMENDATION

Do not operate this unit if the ambient temperature is greater than 35˚C in the cooling mode or 
lower than 5˚C in the heating mode.

Содержание 50F













Отзывы: