6
Fit Side Support Mouldings and End Rail Assembly
Slide half the side rail supports into each of the side rail extrusions as shown below. Next slide the remaining end
rail assembly onto the side rail extrusions and fasten in place with screws provided in kit.
Screw
Side Support
End Rail Assembly
5
Fit Side Rail Extrusions to End Rail Assembly
Slide the side rail extrusions onto one of the end rail
assemblies as shown, and fasten with screws.
Side Rail Extrusion
End Rail Assembly
Screw
4
Fit End Rail Supports to End Rail
Locate the end rail supports which are marked underneath with M513 and have the hardware fitted. Slide these end
supports into the end rail extrusion. Fit the second corner moulding to the open end as shown below and retain with
screw.
Repeat Steps 3 & 4 for the other end rail extrusion, and fit the remaining end supports without hardware fitted.
End Rail Extrusion
End Rail Support
Corner
Moulding
Screw
Page 2 of 6
Rhino Pioneer Full Rail Kit
