8
Wrap the snap hook end of the strap around the ladder
rungs and crossbar ensuring the safety latch is fully
closed. Pull strap to tighten. Check ladder is secure. To
release tension, press the camlock latch and pull the strap
back through the camlock, unhook the snap hook. When
travelling without a ladder, locate the snap hook onto the
hook bracket.
Pull Strap
to tighten
RLS5 Ladder Restrain Strap (Recommended Fitment):
Insert the camlock and hook bracket to the
underside of the rear crossbar 15-20mm apart. Push the attachment bolts up and turn each bolt so that the
channel nut is fully located across the cross bar as shown below. Position the Camlock and Hook bracket to
suit the ladder. Tighten the bolts.
Camlock
Hook Bracket
15-20mm
Both Channel Nuts
must locate fully
across the cross bar.
DO NOT fully tighten
the M6 nut, the latch
bracket must move
freely.
Side View:
Page 6 of 6
MS15-680 Short Multi Slide Step Ladder System
