2
For Customer Service Call 1-888-996-2729
© 2011 Escalade S por t s
All Rights Reserved
IMPORTANT! READ EACH STEP
IN THIS MANUAL BEFORE YOU
BEGIN THE ASSEMBLY.
TWO (2) ADU L TS ARE REQUIRED T O ASSEMBLE
THIS RHINO DOUBLE SHOOTOUT
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS PRODUCT
TOGETHER.
T ools Needed:
Allen Wrench T1 & Wrench T2 and T3 (Included with the Hardware Kit)
Philips Screwdriver
Adjustable W rench or Socket Set is helpful but not required.
A Small step ladder
Make sure you understand the following tips before you begin to assemble your
double shootout.
1.This is an electrically operated product.It is intended for INDOOR use ON L Y .
2.This product is not designed to be used in a garage or on a patio,sunlight may e f fect
the infrared sensors and the unit will not perform correctl y .
You may need to move the unit if it does not perform correctly.
3. T ighten hardware as instructed.
4.Do not over tighten hardware,as you could crush the tubing.
5.Some drawings or images in this manual may not look exactly like your product.
6.
To prevent damage to the electronics do not place this unit any closer that six
inches from the wall.
!
