RHEONIK RHE21 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 58

background image

RHE21 Installation & Startup Guide – Doc. No. 8.2.1.04 – Ver. 1.31

4 / 58

1

General Information

1.1

Important Safety Instructions for operating Coriolis Flowmeters

For RHE21 units requiring 12 to 24V DC power, the use of a properly grounded (PELV)
supply is highly recommended.

The use of shielded cables for all I/O signals is recommended to prevent interference
from high level EMI.

Only the specifically designed shielded cable supplied by Rheonik should be used to
connect RHE Transmitters to RHM Flow Sensors. Do not use other types of cable.

For safety instructions regarding RHM Coriolis Flow Sensors, please refer to the RHM
installation and startup guide manual.

These measuring instruments are not designed for, and should not be installed in, life-
preserving systems used in the medical, motor vehicle, aircraft, water craft or mining
industries.

All national regulations and standards regarding electrical installation must be
observed!

1.2

Manufacturer’s Liability

Rheonik assumes no liability for loss and/or consequential damages stemming from the
use of this product utilized in life-preserving systems in the medical, motor vehicle,
aircraft, water craft or mining industries.

Rheonik accepts no liability for loss or damage resulting from the improper use of any
of its products.

Rheonik assumes no liability for the loss of production and/or consequential damage
from the use of this product unless such liability has been expressly and contractually
agreed.

Rheonik provides a standard one year from shipment warranty on all products for
workmanship and materials. Performance of this warranty will be at the Rheonik
manufacturing facility.

Rheonik assumes no liability for determining the suitability of its products in any specific
application. This is the sole responsibility of the end user.

1.3

Additional Resources

This  guide  is  intended  as  a  quick  reference  instruction  to  aid  the
installation  and  startup  of  an  RHE21  Coriolis  mass  flow  transmitter
with an RHM flow sensor and is a supplement to the documentation
found  in  the  RHE2X  Desktop  Reference.  The  RHE2X  Desktop
Reference and further resources are available for download from the
Rheonik website:

www.rheonik.com

«
...
2
3
4
5
6
...
»

Содержание RHE21



























































Отзывы:

Нет отзывов

Похожие инструкции для RHE21

DigitalFlow XGS868i

Бренд: Panametrics Страницы: 86

Бренд: Nautel Страницы: 20

Бренд: Hach Страницы: 2

Бренд: Daiichi Electronics Страницы: 14

Efector 800 VTV122

Бренд: IFM Electronic Страницы: 5

Бренд: Rohde & Schwarz Страницы: 199

Бренд: RF-Link Страницы: 4

Бренд: American Fibertek Страницы: 4

Бренд: Panduit Страницы: 12

Бренд: BriarTek Страницы: 10

Бренд: JVC Страницы: 2

Kenwood TK-5220

Бренд: JVC Страницы: 128

Бренд: TWIG Страницы: 2

Бренд: Cactus Страницы: 16

Бренд: Cabletron Systems Страницы: 16

Бренд: Icom Страницы: 82

Бренд: Sealey Страницы: 2

Worksafe WST1500

Бренд: Sealey Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды