
4. Push the engine control switch into the
RUN
position
.
Engine Control Switch
5. Firmly grasp and pull the recoil handle slowly until
you feel increased resistance. At this point, apply a
rapid pull while pulling up and slightly away from the
generator
.
6. As the engine starts and stabilizes, gradually move
the choke lever back to the
OFF
position.
3. Move the choke lever to the
ON
position
.
Choke Lever
Starting an Electric Start Generator
1.
Verify the battery is properly installed and both
battery cables are attached
(see Installing the
Battery (Electric start Generators only).
2. Make sure the circuit breakers are properly set
.
1
2
3
4
C
ircuit Breakers
1 -
240/120V Main
Circuit Breaker
Operating
Position
2 -
240/120V Main
Circuit Breaker
Tripped Position
3 -
120V Circuit
Breaker
Operating
Position
4 -
120V Circuit
Breaker Tripped
Position
3. Move the fuel shutoff valve to the
ON
position
.
F
uel Shutoff Valve in the
ON
Position
4. Move the choke lever to the
ON
position.
C
hoke Lever
EN
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com