Rheem XWELL XC-10, Руководство пользователя и инструкции по установке

Страница: 5 / 24

5
ABOUT YOUR WATER HEATER
MODEL TYPE
The Rheem XWELL
TM
water heater is suitable for indoor installation only. Water is
heated by an electric immersion heating unit with temperature control provided by a
thermostat. The thermostat and heating unit operate automatically when heating of
the water is required.
The vitreous enamel lined steel cylinder is provided additional corrosion protection by
a sacrificial anode and is surrounded by high density polyurethane foam to reduce
heat loss and increase performance efficiency. Designed for connection to a mains
pressure water supply, the water heater allows connection to more than one hot water
outlet. The supply pressure should be greater than 350 kPa for true mains pressure
operation to be achieved.
Automatic safety controls are fitted to the water heater to provide safe and efficient
operation.
TEMPERATURE ADJUSTMENT
The water heater features a user adjustable Temperature Dial which is connected to
the thermostat. Temperature adjustment is made by turning the Temperature Dial:
 clockwise to increase the water
temperature.
 anti-clockwise to decrease the
water temperature.
The position of the Temperature Dial
is relative to the dial setting mark:

Set at the “

” mark, heating of
water will not occur.

Set at the “MAX” mark, the water
will be heated to the maximum
temperature of 70°C.
The Temperature Dial incorporates a white light which will either pulse or maintain a
steady glow.
Pulsing white light – Heating Mode : The heating unit is on and heating is taking
place. It is normal for the heating unit to turn on when hot water is being used, or
during standby heat up (recovering heat loss), or when the water heater is switched
on after having been off.
Steady white light – Ready Mode : The water temperature has reached the
thermostat temperature setting and the heating unit is off.
clockwise increases temperature
anti-clockwise decreases temperature
dial setting
mark