Rheem XWELL XC-10 Скачать руководство пользователя страница 2

Страница: 2 / 24

An electronic copy of these Owner’s Guide and Installation Instructions

can be downloaded from rheemasia.com

PATENTS

This water heater may be protected by one or more patents or registered designs

in the name of Rheem Vietnam Ltd.

TRADEMARKS

® Registered trademark of Rheem Manufacturing Company.

TM Trademark of Rheem Manufacturing Company (Singapore) Pte Ltd.

Note:

Every care has been taken to ensure the accuracy in preparation of this

publication. No liability can be accepted for any consequences,

which may arise as a result of its application.

CONTENTS

HOUSEHOLDER

This booklet contains important information about your new water heater.

We recommend you read pages 3 to 11.

The other pages are intended for the installer but may be of interest.

Contents ............................................................................................. 2

Safety, Warnings and Pressure Relief Valve .................................. 3

About Your Water Heater .................................................................. 5

Maintenance Requirements .............................................................. 8

Save A Service Call ......................................................................... 10

Installation – General ...................................................................... 12

Connections – Plumbing ................................................................. 17

Connections – Electricity ................................................................ 20

Commissioning ................................................................................ 21

Draining The Water Heater .............................................................. 22

Warranty ........................................................................................... 24

Содержание XWELL XC-10

























Результаты поиска

Содержание XWELL XC-10

Отзывы:

Похожие инструкции для XWELL XC-10

Бренды по названию

Популярные бренды

Rheem XWELL XC-10, Руководство пользователя и инструкции по установке

Результаты поиска

Содержание XWELL XC-10

Отзывы:

Похожие инструкции для XWELL XC-10

Бренды по названию

Популярные бренды