MAN2100160 rel. 00 dated 05.11.2013 page no. 47 of 53 pages
www.rheavendors.com tel: 0039 02 966 551 fax: 0039 02 96 55 086 e mail: [email protected]
exclusive property of rheavendors group
12.01.
weekly
drip tray
grounds container
product slides
dispensing system
inner side of the machine
external body
power off the machine; detach the power supply cable and
carefully make sure that there is no sign of wear; carefully check
the stability and efficiency of the internal connections of the mains
supply;
extract the drip tray (a), remove the upper grilled cover and wash
with plenty of water; open the door and clean the drip tray housing
and the nozzle holder spout inside the machine (e);
after having opened the door and removed the drip tray, pull the
right side of the drawer forward and remove it; observe the
position of the water inlet tube of the brewer;
attention
the residual coffee grounds shall be disposed of in observance of
the sanitary obligations in force in the country;
turn the baffles of product slides (c) into a close-position, remove
them from the canisters and wash them with plenty of lukewarm
water (product slides are plug-in secured);
turn the fixing levers of mixing bowls clockwise (d), remove the
product nozzles from the holder by releasing them, pull the mixing
bowl and the dust extraction ring; wash the assembly of
disassembled parts with plenty of lukewarm water;
remove all residues from the internal surfaces of the machine and
the door, above all in the proximity of the cup station and clean
with a piece of wet cloth;
dry the parts carefully and re-mount them on the machine;
after opening the door, re-connect the supply cable and power on
the main switch;
use the service key;
attention
act extremely carefully;
the vending machine is supplied and running to all effects; the
mobile parts of the coffee brewer will be handled; act extremely
carefully;
perform some wash cycles of the hydraulic machine circuits (see
08.03.);
remove the service key, put it into its housing, close the door;
clean outside the machine by using a piece of non-abrasive cloth,
dampened with lukewarm water; use a neutral, non-foamy
detergent, only if necessary;
attention
use neutral detergent products only; never use abrasive cloths,
steel sponges, aggressive or foamy detergents and other solvents,
hot water and acids;
c
d
e
a
b
Cino XS grande PRO and PRO VHO
by
