background image

Page 3 of 13

JEUNE FRENCH CONTEMPORARY UPHOLSTERED PANEL CRIB/TODDLER BED

 KIT – ASSEMBLY INSTRUCTIONS

Model No: 1079 - 13/14

CAUTION:

 

ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 

                27 1/4 INCHES BY 51 5/8 INCHES WITH A THICKNESS NOT  

                EXCEEDING 6 INCHES.

    

 WARNING:

 

            

Do not use this crib if the enclosed or attached instructions cannot 

 

   be strictly adhered to. Do not use this crib if the child is able to climb 

 

   out unaided or is taller than 35 inches (890 mm). Do not place 

 

   cords, straps or similar items that could become wound around the 

             child's neck in or near this crib. Ensure that the sides are properly 
 

   latched or locked in place when the crib is occupied. The mattress 

 

   used with this crib should not be more than 5 7/8 inches (150 mm) 

 

   thick and should be of such length and width that the gap between 

 

   the mattress and the sides of the crib does not exceed 1 3/16 inches 

 

   (30 mm) when the mattress is pushed into the corner of the crib. 

             Parents should inspect the crib regularly before putting the child 
 

   in the crib each day and confirm that every component of the crib 

 

   is properly and securely in place.

Содержание JEUNE FRENCH 1079-13














Отзывы: