ASSEMBLY INSTRUCTIONS
Note: - Bed must be assembled by at least two people.
- Please read instructions carefully before assembling bed.
- Use the above parts and fittings list to identify each component.
- Keep all packing materials until assembly is complete to avoid loss of smaller parts.
- Do not completely tighten all bolts until all steps are finished.
A
B
STEP 1:
Page 6 of 12
Attach the Stationary Side Rail (B) to the Side
Frame (A) by using Long Bolt (1), with Spring
Washer and tighten with Allen Key (4).
DO NOT FULLY TIGHTEN AT THIS TIME.
COLE CRIB
1
4
A
STEP 2:
2
Insert L Pin (2) into the holes on the Side Frames (A).
Note: The Mattress Support (C) should be at the highest level
when the child is born. It must be at the lowest level before the
child can stand up. Before installing the Mattress support (C),
please ask the customer at which height they want it installed.
Highest level
Lowest level
Middle level
