Tiga User Manual
UM-Tiga-017-US
Tiga User Manual |
16
Procedure 10
Procedure 10 - Anti-tips
An anti tip can be used to make the chair more stable and is
recommended by a health care professional.
10.1: Swing away anti-tip
To store the anti-tip, push down on the spring-loaded tube
until it releases from the housing. Swing 180 degrees under
the chair and into the locked position. To return to the
operating position, repeat and return the same way. To adjust
the length, press the button on the tube and lengthen or
shorter the wheel tube.
10.2: Single sport anti-tip
To remove anti-tip, remove quick release pin and remove tube.
The clamp attached to the frame is factory fitted and cannot
removed unless by an approved wheelchair technician.
WARNING:
RGK strongly recommends ordering the anti-tips as
an additional safeguard for the wheelchair user.
Anti-tippers MUST be fully engaged. Ensure the
release button of the anti-tipper fully protrudes out of
the hole in the anti-tipper socket.
Ensure both anti-tippers are adjusted to the same
height.
WARNING:
