4
Figure 2-2.
Side Stringer Assembly
3.
Refer to
Figure 2-3
. Mount the assembled stringers to top of canopy extension legs on each side of lift. Canopy rib
bushings are offset to the outside of canopy frame. Stringer connecting angles will then face inside of canopy frame.
Position the stringers such that the canopy protects the entire length of the boat and fasten in place with hardware
shown.
Figure 2-3.
Mounting the Stringers
4.
Refer to
Figure 2-4.
Attach the canopy braces (13) at the bow end of the lift. Ensure the stringers are level and at the
desired position before tightening the bolts. Note that the braces are supplied only with 21 foot and longer canopies.
For 26 foot and longer canopies, an additional pair of braces is supplied. Install the longer braces on the canopy end
with the greatest overhang, which is usually the bow end of lift.
Содержание VL10K Guide On HD
Страница 12: ...10 Figure 2 10 Complete Canopy Framework...
