RGC HL40120, Инструкция по эксплуатации

Страница: 27 / 33

I 5896257 30 3/8 X 3-1/2 HEX HEAD CAP SCREW
4107336 1 HL4K CLEVIS PIN BAG consisting of:
J 4107934 8 2-1/4” OD X .91” ID X 1/16” THICK NYLON LIFTARM WASHER
K 5894109 4 HL CLEVIS PIN ¾ X 5” HEADED
L 4107919 2 7/8 X 7-1/16 CYLINDER BOTTOM CLEVIS PIN
M 4107913 2 HL CLEVIS PIN 7/8X4-1/8 SS (CYL TOP PIN)
N 4107949 4 2” OD X 29/32” ID X 3/16 THICK NYLON HL CYL SPACER
O 4107937 8 1-3/4” OD X 25/32 ID X 1/8 THICK NYLON BUNK WASHER
P 5894108 18 5/32 X 1-3/4 COTTER PIN
Q 5893625 12 7/8 SAE FLAT WASHER
R 5896417 6 3/4 SAE FLAT WASHER
B 4107913 2 HL CLEVIS PIN 7/8X4-1/8 SS (REAR LIFTARM LOWER PIN)
AA 5894105 2 HL CLEVIS PIN ¾ X 4-1/8” HEADED
AB 4107711 8 ALUM BUNK SPACER 1-1/2 OD X 3/4 ID X 3/8 THICK
WARNING:
HYDRAULIC CYLINDER HOSE FITTINGS MUST FACE UPWARDS TO AVOID DAMAGING
THE FITTINGS OR HOSES IF THEY CONTACT THE GROUND DURING OPERATION.
DAMAGE TO BOAT OR LIFT FROM SUDDEN LOSS OF HYDRAULIC FLUID COULD
RESULT.
Figure 7-1
Hydraulic Cylinder and Hose Assembly
23