Address
：
S601-607, S504 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: [email protected]
http://www.rgblink.cn
16
SAVE
Push the [SAVE/1] button, the button light is on, and enable the SAVE function. The number button 1, 2, 3,
4, 5, 6, 7, 8, 9, 0 means SAVE1-10, push any button on to save. For example, push number button 2 and
save to SAVE 5, the OLED panel will show as follows after saving. If the button blinks, means there is
already a save here.
If you would like to save in the flashing button, your previous save will be overwritten. For example, if button 1
blinks, push button 1 again, the screen will show as below:
Push knob to confirm, push[MENU] to cancel; if confirm, screen will show as SAVE FINISHED;
if cancel, screen will go back to menu.
LOAD SAVED SETTINGS
Push [LOAD] to recall saved banks.
The number button 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 means SAVE1-10, if the
button is on, means there’s saved data to recall, if the button flashes, means this bank is currently using, if
the button is off, mean no data saved here.
LCD screen is as below:
Push the button with light to recall save; press [MENU] to cancel load, when the light is off, means
LOAD has been cancelled.
LOAD FROM
>SAVE1
FINISHED
！
KEY ON FOR ALL SAVES
FLASH IS CURRENT SET
Save to
>SAVE5
FINISHED
！
KEY ON FOR EMPTY
Save 1 used,overwrite
YES<OK>,NO<MENU>
