Address
：
S601-607, S504 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Fax: 00865925788216
Email: [email protected]
http://www.rgblink.cn
9
Select “ON” or “OFF”, to enable the swap of the two images of PIP.
Alpha settings:
The alpha parameter of image B can be set from 0 to 16.
Select setting:
To select “IMAGE A” or “IMAGE B” for settings.
Split Settings
Multiple
VSP 268
can be cascaded for seamless splitting. When split, we suggest use distributor to distribute the
signal to the multiple
VSP 268
. Users may also use the on board HDMI LOOP for cascade splitting.
Follow below operations of cascade split to access quick splitting:
Push [MENU] button, rotate the knob, select <SPLIT> to split evenly or unevenly.
Menu as below:
ENABLE/DISABLE: ON or OFF split function, system default as OFF, turn it ON to enable split settings.
H TOTAL: to set the total horizontal pixels of the LED screen
V TOTAL: to set the total vertical pixels of the LED screen
H POS: select it and press the number buttons to input the starting horizontal position.
V POS: select it and press the number buttons to input the starting vertical position.
H SIZE: to set the horizontal size of the part responsible.
V SIZE: to set the vertical size of the part responsible.
RESET: When done wrong, use RESET to remove the settings.
For even split, simply set the H SIZE and V SIZE of each
VSP 268
to be same. Then set the H POS and V POS
of each
VSP 268
accordingly. For uneven split, we have to set the H SIZE and V SIZE of each
VSP 268
individually.
After settings, we can save it to finish the split setting.
