RGBlink RGB-RD-UM-4K, Руководство пользователя

Страница: 30 / 51

4K Ultra HD NDI CAMERA User Manual
29
3) RTP Broadcasting
Main/Sub Stream: On/off
Protocol: RTP or TS
Address: Default
224.1.2.3. It can be edited.
Port: Main Stream Default Port: 4000, Sub Stream Default Port: 4002
Visit: Address comes up after setting. Eg ; rtp: //224.1.2.3:4000; udp: //@224.1.2.3:4000
4) Video Parameters
a.Focus: Focus mode, focus range, focus sensitivity can be set.
Focus Mode: Set the focus mode (the default auto, manual optional)
Focus range: Set the focus range (the default middle, the upper and lower optional)
Focus Sensitivity: Set the focus sensitivity (default is low, high, medium optional)
b.Exposure: Exposure mode, exposure compensation, back light compensation, anti-flicker, gain limit, wide dynamic,
shutter speed, aperture value and brightness can be set.
Exposure Mode: Set the exposure mode (the default automatic, manual, shutter priority, aperture priority, Brightness
priority optional)
Exposure compensation: Exposure compensation setting is active when it is auto status (default is off). Exposure
compensation value: Set the exposure compensation value, valid when it is set for auto (default 0, -7 to 7 optional).
BLC : Set back light compensation, valid when it is auto status (default is off).
Anti-flicker: Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority (default
50Hz, closed, 60Hz optional).
Gain limit: Set the gain limits, auto, active when it is status of aperture or brightness priority (default 4, 0-15
optional).
Dynamic range: Set the dynamic range (default 4, 1-8 optional).
Shutter speed: Active when it is status of manual or shutter-priority (default 1/100, 1/25, 1/30, 1/50, 1/60, 1/90, 1/100,
1/120,1/180,1/250,1/350,1/500,1/1000,1/2000,1/3000,1/4000,1/6000,1/10000 optional).
Aperture value: Set the aperture value, active when it is status of manual or aperture-priority(default F1.8, closed F11,
F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.8 optional).
Brightness: Set the brightness value, active when it is a state of brightness priority (default 7, 0-23 optional).
c.Color: White balance, saturation, color, white balance, sensitivity, color temperature, gain red and blue gain can
be set.
White balance modes:
Set the white balance mode (the default automatic, 3000K, 3500K, 4000K, 4500K,
5000K,5500K, 6500K, 7000K manual, One-push optional).
Note: Click the “ Correction ” button when selected the One-push white balance mode.
Red fine-tuning: Defaul t -10~10 (only available in automatic mode)
Blue fine-tunable: Default - 10~10 (only available in automatic mode )
Saturation: Set the saturation (default 60%, 70%, 80%, 90%, 100%, 110%, 120%, 130%, 140%, 150%, 160%,
170%, 180%, 190%, 200% optional).
Auto white balance Sensitivity: Sensitivity Auto white balance settings (default is low, high, medium optional).
Chroma : Set the chroma (default 7, 0-14 optional).
White balance sensitivity
: Set the white balance sensitivity (Default setting: High, with low, middle for options)
Red Gain
: Set the red gain, effective when it is manual (default 145, 0-255 optional).
Blue Gain: Sets the Blue gain, effective when it is manual (default 56, 0-255 optional).
d.Image: Brightness, contrast, sharpness, black and white mode, the gamma curve, Horizontal Flip and Vertical
Flip can be set.
Brightness: Set the brightness (default 7, 0-14 optional).
Contrast: Set the contrast (default 7, 0-14 optional).
Sharpness : Set the sharpness value (default 6, 0-15 optional).
Black and white mode: Set black and white mode (default color, black/white optional ).