© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | [email protected] | www.rgblink.com
25
3.2.3 Output|Input|Overview
Device Connection
Output Setting
Standard Resolutions can be chosen as shown in the
right figure.
The rear panel can be seen after connection
1. Click the device you need in the <All Devices>
list,such as
Q16pro SN: 8043, IP: 192.168.0.114
2. click
in the <Chosen Device>.
Resolution
Click any output port, the board where the port
locates is selected. Users can do settings to the port
now.
A red rectangle flashes around the chosen port
when it is clicked.
Note
:
purple tip indicates input,
blue tip indicates output,
yellow tip indicates communication.