RGBlink MSP 329, Руководство пользователя, Страница: 7 / 35

MSP329 User Manual
6
1.2 Front Panel
MSP329 TX
No. Name Description
1
POWER
Indicator On MSP 329 TX is powered on.
Off MSP 329 TX is powered off.
2
STATUS
Indicator
Solid On
MSP 329 TX is connected to both an active video source and MSP
329 RX.
Blinking

MSP329 TX is disconnected from an active video source.

MSP329 TX is disconnected from MSP329 RX.
Off

MSP329 TX is powered off.

MSP329 TX is in the boot process.

Network is down.
3
Working
Mode
Switch
MODE: use this switch to toggle between normal and debug modes .
NORMAL
(Default)
In this mode, you can connect the rear panel RS232 port to a RS232
device such as a computer for bi-directional serial communication
with a RS232 device on the IP controller side.
DEBUG
In this mode, you can connect the rear panel RS232 port to a RS232
device such as a computer for debugging MSP329 TX.
4
Link DIP
Switch
4 3 2 1
O N D IP
DIP : this DIP switch consists of four manual switches, which are used to route
audio, video together with IR, and USB signals between MSP329 TX and MSP329
RX based on their positions. By default, each individual switches is in the up
position. For more information, see "Using DIP Switch to Perform Routing".
Note:For the DIP switches in both encoder and decoder, changes to them take
effect immediately without rebooting the system.